1. Disconnect fuel highways from forward and back parts of the filter.

2. Remove a collar and the fuel filter.

       PREVENTION

The arrow on the filter has to be directed to the engine.

Fig. 5.4. Fuel filter: 1 – fuel supply pipeline; 2 – connecting nuts; 3 – fuel pipeline

1. Install the fuel filter and fix it by a collar (fig. 5.4).

2. Connect fuel highways to forward and back parts of the filter.

1. Disconnect fuel highways from forward and back parts of the filter.

2. Lift a pillow of back sitting.

3. Remove a carpet from a body floor.

Fig. 5.5. Connections of the fuel pump: 1 – hose of the fuel pump; 2 – socket; 3 – fuel pump

4. Disconnect the socket and the fuel highway from the fuel pump (fig. 5.5).

5. Turn out 6 bolts and remove the fuel pump.

1. Remove the filter of preliminary cleaning.

Fig. 5.6. Fuel pump

2. Remove the fuel pump with rubber laying (fig. 5.6).

1. Install the new filter of preliminary cleaning and rubber laying of the pump and a cover.

2. Apply sealant and screw bolts.

1. Install the fuel pump and fix it by 6 bolts.

2. Connect the socket and the fuel highway to the fuel pump.

3. Lay a carpet on a body floor.

4. Lower a pillow of back sitting.

5. Connect a wire to the negative plug of the rechargeable battery.

1. Disconnect a wire from the negative plug of the rechargeable battery.

2. Pump out fuel from the fuel tank.

Fig. 5.7. An arrangement of sockets (2) of the fuel level sensor on a cover of the fuel pump (1)

3. Disconnect electric sockets of the fuel level sensor (fig. 5.7).

4. Remove a collar of fastening of a hose and a returnable fuel-supply line.

Fig. 5.8. Arrangement of bolts of fastening of the fuel level sensor and fuel pump

5. Turn out 6 bolts and remove the fuel level sensor and the fuel pump (fig. 5.8).

Fig. 5.9. An arrangement of a collar (1) of fastening of a hose to a cover (2) fuel level sensors and the fuel pump

6. Remove a collar and a hose from the lower part of the fuel level sensor (fig. 5.9). Clear privalochny surfaces.

1. Establish a hose on the lower part of the fuel level sensor and fix it by a collar.

2. Install the fuel level sensor and the fuel pump.

       PREVENTION

At installation it is necessary to use new bolts, aluminum washers and laying.

3. Establish a collar of fastening of a hose and the returnable fuel highway.

4. Connect sockets to the fuel level sensor.

5. Fill in fuel in the fuel tank.

6. Connect a wire to the negative plug of the rechargeable battery.