514f8a21

12.6. Specifications

Brake drums
Internal diameter........ 200,00 mm
The most admissible internal diameter after boring........ 201,00 mm

Disk brakes
Diameter of a brake disk........ 236,00 mm
Cross beats of the established disk........ 0,10 mm
The admission on thickness........ 0,10 mm
Thickness of a brake disk........ 12,70 mm
The minimum thickness after processing of a surface at repair........ 9,7 mm (after thickness of a brake disk reached this size, change of brake shoes it is possible to produce only once).

Internal diameter of the main brake cylinder
Nominal........ 22,22 mm
Maximum........ 22,29 mm

Internal diameter of the working brake cylinder
Nominal........ 19,05 mm
Maximum........ 19,12 mm
Piston
Diameter of the piston........ 18,98 mm

Inhaling moments
Brake board to a rotary fist........ 4 N • m
The vacuum amplifier to an assembly bracket........ 18 N • m
The vacuum amplifier to a partition of a motor compartment or to an arm of fastening of a pedal........ 18 N • m
The proportional valve to the main brake cylinder........ 41 N • m
Support to a rotary fist........ 95 N • m
Brake disk to a nave of a forward wheel........ 4 N • m
Basic plate of a brake to the lever of a back suspension bracket, M 8x10........ 28 N • m
Drum brakes to a nave of a back axis........ 4 N • m
The union to a support or the working brake cylinder........ 9 N • m
The lever of the parking brake to the bottom........ 20 N • m
Brake hose to a support........ 39 N • m
Brake pedal axis to knot of fastening of a pedal........ 20 N • m
Brake pedal arm to a partition of a motor compartment........ 18 N • m
The working brake cylinder to a brake board........ 9 N • m
The main brake cylinder to the vacuum amplifier........ 18 N • m
Connecting nut of a vacuum hose to an inlet collector........ 15 N • m
All connections of the brake pipeline........ 4 N • m
Front seat to the body bottom........ 20 N • m
Brake hose with a bracket to a wheel arch bracket........ 8 N • m
Hollow perepuskny bolt of a brake hose........ 25 N • m
Guide of blocks to a support........ 95 N • m